Carl Valentin · Moteurs d'impression
Carl Valentin ILX V
ILX V
Compact industrial print engine for print & apply — prints the label in real time and feeds it straight to an APX V or WMX applicator.
Thermal transfer and direct thermal print engine in nine width/resolution versions, 54 to 108.4 mm at 200–600 dpi and up to 400 mm/s. Right- or left-hand, built in aluminium and stainless steel, and mountable in any position — from above, from the side or upside down.
The ILX V is the print engine at the heart of Carl Valentin's print & apply systems. It prints each label in real time, in thermal transfer or direct thermal, and hands it straight to the applicator: the pneumatic APX V for tamp, blow-on or roll-on transfer, or a WMX wipe-on applicator that needs no compressed air at all.
Nine versions cover 54 to 108.4 mm print width at 200, 203, 300 and 600 dpi, at up to 350 mm/s in thermal transfer and 400 mm/s in direct thermal (100 mm/s on the 600 dpi 106/24). Labels from 15 mm up to 3000 mm long run from an internal roll of up to 150 mm diameter, or up to 330 mm with an external unwinder.
The housing is aluminium and stainless steel, available in right- and left-hand versions, and mounts in any orientation — a new fixing point on the underside lets it label from above, from the side or upside down. The multilingual control unit rotates and moves to suit the installation. A V-series processor (ARM Cortex A8, 1 GHz, 512 MB RAM), the usual industrial interfaces and external I/O make it easy to integrate into a packaging line, and the Greek character set is built in.
Vidéos
ILX (Industrial Labeling System) — Loading the Label Roll
Installation
Configurations
- ILX V 56/8Standard200 dpi, 350 mm/s TT / 400 mm/s TD, 56 mm print width, 60 mm passage width, 55 mm ribbon width, 211 × 281 × 375 mm, 10.6 kg.
- ILX V 80/8200 dpi, 350 mm/s TT / 400 mm/s TD, 80 mm print width, 90 mm passage width, 85 mm ribbon width, 234 × 281 × 375 mm, 11.1 kg.
- ILX V 54/12300 dpi, 350 mm/s TT / 400 mm/s TD, 54 mm print width, 60 mm passage width, 55 mm ribbon width, 211 × 281 × 375 mm, 10.6 kg.
- ILX V 81/12300 dpi, 350 mm/s TT / 400 mm/s TD, 81 mm print width, 90 mm passage width, 85 mm ribbon width, 234 × 281 × 375 mm, 11.1 kg.
- ILX V 103/8203 dpi, 350 mm/s TT / 400 mm/s TD, 104 mm print width, 116 mm passage width, 110 mm ribbon width, 263 × 281 × 375 mm, 11.1 kg.
- ILX V 104/8203 dpi, 350 mm/s TT / 400 mm/s TD, 104 mm print width, 116 mm passage width, 110 mm ribbon width, 263 × 281 × 375 mm, 11.1 kg.
- ILX V 106/12300 dpi, 350 mm/s TT / 400 mm/s TD, 105.7 mm print width, 116 mm passage width, 110 mm ribbon width, 263 × 281 × 375 mm, 11.1 kg.
- ILX V 106/24600 dpi, 100 mm/s, 105.7 mm print width, 116 mm passage width, 110 mm ribbon width, 263 × 281 × 375 mm, 11.1 kg.
- ILX V 108/12300 dpi, 350 mm/s TT / 400 mm/s TD, 108.4 mm print width, 116 mm passage width, 110 mm ribbon width, 263 × 281 × 375 mm, 11.1 kg.
Options usine
- External label unwinders up to Ø 330 mm (PA 72B/74E/75B/76E/77E/79E, per width and hand)
- Applicator prearrangement — interface and control signals for a Valentin applicator
- Signal lamp for printer status
- Label prewarning PA7XB — signals the approaching end of the label roll
- Distribution box (0.3 m or 2 m I/O cable) for product sensor, signal lamp and further lines
- Carrier plate extension for signal lamp, distribution box and service unit
- Fixing flanges and base clamps, Ø 30 or 40 mm, for mounting in the machine
- Encoder with friction wheel (2.5 or 4.5 m cable) — matches print speed and timing to the line in wipe-on use
- Product sensor (reflex) or foot switch to trigger the print
- Label photocell transmission + reflex, from above or below (black marks)
- Transparent polycarbonate cover for harsh environments, and a port protection set
- USB WLAN stick (802.11n)
Accessoires
- APX V pneumatic applicator (200 / 300 / 400 mm stroke) — see ILX V + APX V
- WMX wipe-on applicators, spring-mounted, adjustable or adjustable 90° — see ILX V + WMX
- SD memory card 16 GB
- Valentin cleaning set for printhead and rollers
Documents
- ILX V operating manual · v2026-04-17 (PDF, EN)
Logiciels compatibles
Carl Valentin Labelstar Office
Label design and printing software for Carl Valentin printers — a free Lite edition and a full Standard edition.
Carl Valentin ConfigTool
Free program to update and configure Carl Valentin label printers, direct print modules and print engines.
Imprimantes similaires
Carl Valentin ILX V + APX V
Pneumatic print & apply: the ILX V prints, the APX V tamps, blows or rolls the label onto the product — from above, below or the side.
- Tampon
- Dessus
- Dessous
- Côté
Carl Valentin ILX V + WMX
Wipe-on print & apply in one step: the ILX V prints, a WMX applicator wipes the label onto the passing product — no compressed air.
- Par essuyage (wipe-on)
- Dessus
- Dessous
- Côté
Demander un devis
Envoyez-nous la configuration et nous reviendrons vers vous avec un prix et un délai.
Merci — votre demande a été envoyée.
Nous vous répondrons par e-mail, généralement sous un jour ouvré.